Resin & finishing reference library

Preparation table

Sandpaper grit reference

Look up common sanding stages, then match the abrasive to the surface and the finish instructions. This is a preparation reference, not a universal grit sequence.

Terminology

Resin and coating terms

Read a technical data sheet with the measurement basis and conditions in view. Search related terms together to see distinctions that affect your project inputs.

Troubleshooting

Epoxy troubleshooting reference

Start with the observed symptom and collect the facts before choosing a remedy. These checks organize common possibilities; they do not diagnose a batch or prescribe a repair for an unknown resin.

Applicator reference

Paintbrush and roller reference

Compare bristles, brush shapes and roller-cover specifications before choosing an applicator. These are common guide examples; the coating’s own application instructions take priority.

Finish comparison

Paint sheen reference

Compare the appearance and practical questions behind common paint-sheen labels. Names differ between product lines; this is a reading aid, not a numerical gloss-conversion chart.

Material data

Resin and mold rubber specifications

Look up a small, named selection of manufacturer-reported properties. Keep the material, measurement state and test conditions together; these entries do not rank products or approve a substitution.

Time and conditions

Dry, recoat and cure time reference

Compare named milestones for a few specific products. Time to touch, recoat, demold, wash or use a piece are different decisions. Do not apply one product’s time to another or treat this reference as a countdown timer.

Moldmaking checks

Silicone cure-inhibition reference

Check the master, silicone chemistry and surface treatments before making a mold. These are documented risk factors and questions to investigate, not an all-material compatibility matrix or a cure diagnosis.